GLP impression X5 IP Bar 1000

Main changes from V1.1.3 to V1.1.5

‍NEW FEATURES & IMPROVEMENTS

‍Because of an added filter holder frame to the impression X5 IP Bar, the tilt speed has to be adjusted with this software update: Tilt speeds for Performance Mode "Smooth", "Normal" and "Fast" were adjusted for best performance.

"Normal" speed is minimal decreased for a save perfomance with installed filter.

"Fast" speed is adjusted to max. speed for use without installed filter.

‍BUG FIXES 

none

‍UPDATE PROCESS

Fixtures need 1 update, if V1.0.1 or higher is installed already.

Via D3Prog (RS485/DMX):

1. Update the Main Application V 1.1.5 via DMX/RS485 via D3Prog (impression-X5_1.1.5_DMX.bin)

Optional via iQ.Service App (no Login needed) :

Change the Control Protocol in the Fixtures Protocol Setup Menu to iQ.Mesh,

or via DMX Control Channel to iQ.Service Connect: DMX 012-013 (4,7% - 5,1%)

1. Update the Main Application V 1.1.5

Please make sure that no other DMX receivers or consoles are active on the line

and fixtures Control Protocol is set to DMX!

‍INFO

This update is show critical as the tilt speed is changed to work with the added filter holders and optional filters.

This update is an important update that should be installed to prevent device errors

‍VERSION DETAILS

impression-X5_1.1.5_DMX.bin (provided via website as download and iQ.Service App)

‍DOWNLOADs

impression X5 IP Bar

GLP impression X5 IP Bar 1000 Firmware V1-1-5 Rev20230720-2 (zip | 339.04 KB)

This Newsletter was sent on Wednesday, 20 November 2024 12:23 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍