JDC2 IP - V0.6.1

MAIN CHANGES FROM V0.5.2 TO V0.6.1

Reworked the DigiFX and their manipulation

Therefore some of the DigiFX marked as experimental and can be used only when enabled via the menu or the DMX control channel. 

This is done in order to have a stable and reliable preprogramming.

The “experimental demo DigiFX” are most likely to receive some changes during the next software releases or could be exchanged completely. Whereas the "released" DigiFX may only receive some optimisation in speed, scaling, etc.

‍UPDATE PROCESS

Update via Windows PC / ethernet network daisy chain with the GLP Upload App “susgui-0.1.4.exe” and firmware version “JDC-2_0.6.1_sus.bin”.

Please see the update manual in the firmware download package.

‍INFO

This update is show critical and is an important update to secure show stable preprogramming and show stable fixture updates in future.

• DIGI FX have been changed (removed, adjusted, moved in position, etc.)
• Tilt speed has been increased
• ArtNet and sACN are NOT implemented
• RDM does not work. Eg setting a DMX address with RDM will cause fixtures to reset
• NDI ports have been limited to 1 and 2 
  • For now we suggest to just use NDI port 1 (GLP-JDC2-1) and 2 (GLP-JDC2-2) for external NDI capture.
  • For higher resolution than 640x480px NDI streams and high-performance sync the GLP FVP protocol is implemented on NDI stream 3 → Do not use this NDI port for normal NDI capture. For more information contact your local GLP product specialist.

‍DOWNLOAD

GLP JDC2 IP Firmware Update V0-6-1 Rev20240529-1 (zip | 56.57 MB)

This Newsletter was sent on Mercredi, 25 Décembre 2024 14:17 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍